How to effectively perform Crime Scene Cleaning process

Crime scene cleaning

Crime scene cleaning is one of the most difficult cleaning jobs someone may have to perform since it involves dealing with blood, bloody fluids, bone pieces, biohazard materials, water damage and odor. The job also needs to be performed with extreme care and profession since an unclean crime scene can be a source of unhygienic conditions for the residents and their furniture. Crime scene cleaning also involves the use of professional tools and forensic kits; therefore, the person performing the process should be fully acquainted with them. There are various steps involved in the crime scene cleaning process and we will describe them in detail in this article.

Continue reading How to effectively perform Crime Scene Cleaning process

Most Effective Water Damage Prevention Tips and Techniques

water damage on wall in home

Water damage prevention slows down or mitigates the impacts of water exposure on a building and furniture, hence saving precious time and money for the residents. We will discuss techniques and tips below, which can help in mitigating the water damage occurrence. Water damage can be a source of grave loss for home or any building since it can weaken the strength of the building, hence diminishing its durability. It can also affect the paint, wallpaper covering and air duct systems in the homes resulting in deteriorating the outlook as a whole. The presence of water damage is also harmful since it leads to health issues for the residents of the building as well.

The moisture level of the home may be affected while mold may quickly grow on water damaged damp walls or carpets. It is also difficult to control the inner temperature when the walls and ceiling of the building are affected by water. It is, therefore, important for the residents to take good care of the building and make use of water damage prevention tips and techniques.

These tips and techniques are provided by Always Preferred Restoration, a carpet cleaning and restoration company in Missoula MT:

Regular inspection of the Plumbing and Drainage System

Plumbing and drainage systems are responsible for mostly causing water damage to the buildings. A leaking pipe, joint or a broken part may result in the spillage of water resulting in water damage. The noise of water spillage may also point to the fault in the system. It is an important water damage prevention technique to inspect the system regularly. It is advisable to install a high performing system, which has more capacity than your maximum needs. Pressure on the system should be as low as possible. When you come across a leak in the system, get it fixed as soon as possible no matter what the size of the leak.

Plants and Trees presence around the building

The plant usually grows towards the nearest water source, which means they may grow towards the pipes and break them. You should know the location of the pipes before planning the trees. It is an important water damage prevention tip.

Keep an eye on Water Bill

Average water use is normally standard for most homes and the water bill remains in a range. However, if the bill moves above this limit, it may indicate leakage.

Roof Maintenance and water drainage pipes

Water and snow may gather on the roof resulting in water damage. It is necessary to have roof maintenance services so that the drainage system can perform to its full capacity. Keep your roof dry as well.

Water Detecting Device

Install a water detection device on some part of the building, which provides data on the presence of water content in the building and any liquid stains found.

It is necessary to stay prepared for any circumstance beforehand and especially for water damage prevention purposes so that serious problems can be avoided. 

How to effective Perform Leather Cleaning Process

Leather cleaning on a couch

Leather cleaning is an important requirement of household consumers and industry since there is large-scale use of leather. The leather is a strong and durable material but it is also sophisticated under the circumstance. Similarly, leather can get dirty or stained over the course of time especially when it is used rough or exposed to environmental conditions. In households, leather is used as furniture covering is well where it also needs to be cleaned regularly. There are a number of leather cleaning processes used commercially and in households depending upon the cleaning requirements, like with stairs or air ducts, and the strength of the leather material and the type of stains.

The leather cleaning process can be performed at home as well as using the natural cleaning agent. If the process is performed carefully then all sorts of stains and dirt can be removed from leather material. Usually, the cleaning solution used at homes is that of Vinegar and Distilled Water. A 50-50 solution of the two components provides a strong cleaning solution, which can even remove hard stains from leather.

Supplies Needed for Leather Cleaning Process

There are a number of supplies required for the leather cleaning process, which are mostly found in households. Some of the supplies needed are as follows:

  1. Vinegar Solution: This will be required for the cleaning purposes.
  2. Essential Oil: An oil such as lemon juice with water can be used to hydrate the leather. These oils may bring the shine of the leather material.
  3. Beeswax: It may be used for conditioning the leather material. It has a very positive effect on the look of the material.
  4. Tissue or Towel: It may be required to remove certain stains from the leather material. Rubbing with tissue and towel will preserve the quality of the material. A clean dry towel may help in drying the leather material as well.

Cleaning Leather Process

Following steps are involved in cleaning the leather material:

  1. Wipe off removable dirt from the leather material before applying the cleaning solution.
  2. Once the dirt has been removed, determine the areas where the stains have appeared.
  3. Apply the cleaning solution on these parts of the material and gently rub it with tissue.
  4. Continue rubbing until the stains have been removed.
  5. You can apply any oil or leather-conditioning agent if the leather material is worn out.
  6. Rinse leather with clean water after the cleaning process has been performed.

How to Do It Yourself Air Duct Cleaning Process

air duct cleaning in a home

Air Duct cleaning is essential today since the atmosphere around us is not pollution free, which has led to severe health issues both in domestic and commercial buildings. Studies have shown that with the rise in pollution levels, health issues have started to get complicated and the diseases which are caused by pollutant air are more prevalent. Asthma and tuberculosis are major health issues in different parts of the world and even people who spent of their time in homes are not spared from them. It is mainly due to the unclean and pollutant air ducts, along with the pollutant dust found in carpets.

Similarly, moist and water exposed air ducts allow a habitat to micro-organisms which cause severe health issues in residents. It is, therefore, necessary to regularly perform the air duct cleaning process through either professional help or Do-It-Yourself techniques.

Supplies and Equipment required in Air Duct Cleaning Process

Following is a list of few items, which will help, in smooth and effective cleaning of the Air Ducts:

  1. Vacuum Cleaner: This will be required in order to suck the impurity particles from the air ducts. It is recommended to use the vacuum cleaner with a long hose so that it can reach the depths of the duct.
  2. Furnace Filter: You will need to change the filter after schedule cleaning. A clean filter will ensure that air coming in the home is clean as well.
  3. Brush Kit: This will help in manually and thoroughly cleaning the duct.
  4. Screw Driver Kit: In case, it is required to remove some portion of the duct for cleaning.
  5. Paper Towel

Procedure for Air Duct Cleaning

Following steps can be followed in order to properly clean the air duct:

  1. First, remove the coverlid of the air duct and cover it in paper towels. Paper towels are not just for spills and stains, they are used in order to protect the coverlid from contamination.
  2. Now with the help of a vacuum cleaner or a brush, start cleaning the inner portion of the air duct. A large hose vacuum cleaner should be used in order to properly clean the deep portions of the duct. Similarly, large handle brush can be used in order to reach the deep portions of the duct.
  3. Clean the duct from both ends so that most portion can be covered in the air duct cleaning process.
  4. Cover the cleaned portion with paper towels so that it can remain clean when you are working on other portions of the air duct.